
Why Do Watches Have Jewels? The Rubies Inside Movements
In this article
Open a mechanical watch’s specifications and you’ll find a line reading “17 jewels” or “21 jewels” — and inside the case, the jewel bearings those numbers refer to. Watches have jewels because these tiny synthetic rubies and sapphires act as hard, low-friction bearings at the pivot points of gears, pinions, and wheels, keeping the movement accurate and stopping metal parts from wearing each other down.
Tiny Stones With A Serious Job
Jewel bearings, as they’re formally called, are exactly what the name suggests: bearings made out of jewels, found in higher-end automatic and hand-wound watches. The material is not glamorous quarry-sourced mineral but lab-created rubies or sapphires, grown in a furnace and cut to shape. Hardness is the whole point — a modern watch jewel rates a 9 on the Mohs scale, which puts it just below diamond.
Watchmakers place these stones around pivots, gears, and pinions. A polished steel pivot spinning inside a jewel-polished hole encounters far less resistance than it would grinding against another piece of metal. That single substitution ripples through the entire movement: less drag, steadier rotation, longer life.
What Metal-On-Metal Friction Costs A Movement
Friction is the quiet enemy of every mechanical caliber. When moving parts make constant contact, higher friction can cause variations in timekeeping and add to premature wear, corrosion, and early servicing. In time, that can mean a watch that drifts, loses amplitude, or ends up on the watchmaker’s bench sooner than it should.
Jewels attack the problem at its source. By giving the moving parts a slick, nearly wear-proof surface to ride on, they help reduce friction, improve timekeeping precision, and prevent premature wear. There’s an energy argument too: a low-friction movement needs less torque from the mainspring to keep ticking, so more of the stored power goes into turning hands rather than fighting resistance.
The parts that benefit most are the ones touching constantly. The escape lever and the impulse jewel, for instance, make contact with other components and would normally wear down easily. The escape wheel and the tick you hear lock and release over and over as the watch runs, while the balance wheel, the heartbeat of the movement, benefits from consistent energy delivery to keep its oscillation even. Both live or die by how little friction sits in their path.
Where The Rubies Sit Inside The Caliber
Jewel placement follows the wear map of the movement. Common locations include pivot bearings for the gear train, the pallet fork pivots, the escape wheel, automatic winding systems, and calendar mechanisms. Every one of those spots hosts a part spinning or rocking thousands of times an hour, so every one is a candidate for a stone.
Think of the caliber as a road network. The mainspring delivers power, the gear train carries it toward the escapement, and the escapement meters it out. Each junction where a shaft turns in a plate is an intersection that would grind down if it were bare steel on bare brass. A jewel turns that intersection into a nearly frictionless crossing.
When Watchmakers Cut Real Rubies
The idea is older than most people assume. Jewels first appeared in watches in the early 1700s, pioneered by the Swiss inventor Nicolas Fatio de Duillier together with the Debaufre brothers. At that stage there was no synthetic option — early watch jewels were natural rubies or diamonds, with genuine rubies being the historical material of choice.
The catch was cost. Cutting and drilling a fragile natural gem to microscopic tolerances was painstaking, which kept jeweled movements rare and expensive for a long stretch. Only in the 1900s did jewel technology become part of the mainstream, and 20th-century watchmakers began using synthetic jewels, which offered more consistent sizes and shapes than hand-cut natural stones. That shift is what turned a luxury experiment into an industry standard.
Decoding The Jewel Count Printed On A Dial
The jewel count refers simply to how many jewels are used in the movement of a watch. A 17-jewel watch contains 17 functional jewel bearings, and it’s often called a fully jeweled watch because that number typically covers all the necessary pivot points and moving components in a hand-wound or simple automatic design. Entry-level mechanical watches may sit right at 17.
Step up to 21 jewels and the count signals additional components and complexity — often automatic winding or calendar functions. The concrete difference from 17 is a few extra capstones, jewels placed to reduce positional errors, meaning errors that appear when the watch sits in different orientations. You can go deeper in 21 Jewels: The Magic Number Explained, and our companion piece Why Watches Have Jewels (And No, Not Diamonds) covers the material story in more detail.
Beyond that, the numbers climb with the mechanics. High-quality mechanical watches typically range from 17 to 25 jewels, while higher-end movements can carry counts in the mid 20s, or even 30 or more. Complicated chronographs and perpetual calendars may use 30+ jewels because every added function brings more components and therefore more bearings. Ultra-thin watches, interestingly, also use a higher number of jewels in their movements.
At the other end of the scale, basic vintage models may have only 7 or 11 jewels. Before the 1970s, all watches were mechanical, and many calibers of that era used about five to seven jewels — proof that a usable watch didn’t always demand a full set of stones. For a modern reference point, the Nixon Spectra automatic carries 21 jewels.
To see the small details up close, a watch loupe helps.
If you want to test how well these specs stick, the Watchdle game turns details like jewel counts and movement layouts into a daily guessing challenge — one link, and you’re hooked.
Quartz Calibers And The Jewel Question
Not all watches have jewels. Mechanical watches, which run on spring-wound movements and therefore don’t require a battery, make use of jewels in the movement — that’s the classic pairing. Quartz watches, however, are a different case: they do have moving parts just like mechanical watches, but not all quartz watches use watch jewels, and many use no jewels at all.
The logic tracks with how each type spends its energy. A quartz caliber’s gear train turns briefly and intermittently, driven by a stepper motor, so the constant-load wear problem is smaller. If you’re weighing the two technologies against each other, Automatic Vs Quartz: The Real Difference breaks down what else separates them.
FAQ
What are watch jewels made of today?
Modern jewels are lab-created rubies or sapphires, grown synthetically rather than mined. They rate a 9 on the Mohs hardness scale, which is what lets them serve as nearly wear-proof bearing surfaces.
Why do some movements carry 21 jewels instead of 17?
The extra stones are capstones added to cut down positional errors, so the watch keeps steadier time regardless of how it’s lying. A 21-jewel count also usually points to extra gearwork such as automatic winding or a calendar.
Who first thought to put jewels inside a watch?
Credit goes to Nicolas Fatio de Duillier and the Debaufre brothers, who introduced the technique in the early 1700s. Their jewels were genuine natural rubies, since synthetic stones didn’t exist yet.
Can a watch run without any jewels?
Yes — many quartz watches contain no jewels at all, even though they still have moving parts. The count also varies widely on the mechanical side, with some vintage models getting by on just 7 or 11 bearings.
As an Amazon Associate we earn from qualifying purchases.


