WATCHDLE

Lorige BL-Endurance Watch Reuses LMP2 Brake Pads
News
·2 min read

Lorige BL-Endurance Watch Reuses LMP2 Brake Pads


In this article
  1. A 42mm Case Formed From Carbon/Carbon Brake Pads
  2. Movement And 168-Hour Autonomy
  3. Inter Europol Competition’s LMP2 One-Two And Warsaw Base
  4. Carbon/Carbon Heat Ranges Behind The Case Material
  5. FAQ
    1. How many watches can one brake pad provide?
    2. What does the movement contain?
    3. Where did the brake-pad material originate?

Lorige and Inter Europol Competition have introduced the Lorige X InterEuropol Competition BL-Endurance Watch, also designated Lorige BL-Evo.09/IEC. aBlogtoWatch reported the project in an article dated October 31, 2026, and lists the watch as a 50-piece limited edition. The collaboration connects Lorige with Inter Europol Competition’s LMP2 racing activities.

A 42mm Case Formed From Carbon/Carbon Brake Pads

According to aBlogtoWatch, the BL-Evo.09/IEC has a 42mm case diameter, a 50mm lug-to-lug distance, and a 10.30mm thickness. The case material is sourced from Carbon/Carbon brake pads taken from high-end race cars. Each brake pad yields two, perhaps three watches. The left profile of each case is laser-etched with the specific race, car, and finishing position linked to that part.

Movement And 168-Hour Autonomy

aBlogtoWatch reports a 168-hour power reserve. The movement uses two mainspring barrels and is manually wound through a dynamometric crown. It contains 175 components and runs at 3Hz. Its thickness is 3.98mm. The movement also includes an indicator for remaining autonomy. It was developed with Chronode SA and assembled in La Chaux-de-Fonds.

Inter Europol Competition’s LMP2 One-Two And Warsaw Base

The brake material comes from the victorious brakes of the No. 43 and No. 343 cars of Inter Europol Competition, following the team’s historic LMP2 one-two finish, according to aBlogtoWatch. Inter Europol Competition is based in Warsaw, Poland, and has three Le Mans category wins. Lorige served as official timekeeper during the team’s IMSA season. Lorige was founded in 2018 by Clément Etienvre, Philippe Dumas, and Emeric Paraud.

Carbon/Carbon Heat Ranges Behind The Case Material

aBlogtoWatch notes that Carbon/Carbon brake pads experience heat cycles between 250°C and 850°C (482°F – 1,562°F). Peak conditions can potentially exceed 1,000°C (1,832°F). Those ranges describe the operating environment of the pads used for the watch cases.

To see the small details up close, a watch loupe helps.

For a watch-identification diversion, the Watchdle game is available online.

FAQ

How many watches can one brake pad provide?

aBlogtoWatch states that each brake pad can produce two, perhaps three watches. That yield is separate from the overall 50-piece limited edition.

What does the movement contain?

The movement has two mainspring barrels, 175 components, and a 3Hz operating frequency. It measures 3.98mm thick and offers a 168-hour power reserve, with an indicator for remaining autonomy.

Where did the brake-pad material originate?

The material came from the victorious brakes of the No. 43 and No. 343 cars of Inter Europol Competition. Those cars completed a historic LMP2 one-two finish, and the team is based in Warsaw, Poland.

As an Amazon Associate we earn from qualifying purchases.

Sources

  1. ablogtowatch.com